Abicor Binzel MB36 Conical Shroud

Abicor Binzel MB36 Conical Shroud

The gas nozzle ensures a proper gas flow in the welding process by guiding the gas stream compressed into the process and thus protecting the arc from the surrounding atmosphere. To ensure that this is always guaranteed, the gas nozzle must be clean and free from particles as far as possible, which inevitably arise during MIG/MAG welding – which is a short-circuit arc process. Any interfering contour caused by adhered or burnt-in particles will cause the gas flow to swirl and affect the gas coverage. It is therefore all the more important to protect the shroud as well as possible from spatter adhesion. On the one hand by the choice of material, on the other hand by the use of anti-spatter protection.

Another task of the gas nozzle is to dissipate the heat generated in the process as quickly as possible so that the welding torch itself is protected from overheating. This is also especially important when welding preheated components.

A nickel coating prevents weld spatter, which occurs in a MIG/MAG process, from adhering easily. At the same time, these gas nozzles with their copper body offer the advantages of copper gas nozzles. In addition, the reflective properties of nickel keep both light and heat out and ensure that the temperature of the welding torch remains low.

The conical gas nozzle is considered the standard gas nozzle. It tapers towards the front end and thus offers better accessibility to the workpiece, such as when welding at an angle. With strongly conical gas nozzles, even narrower angles can be achieved. Of course, this shape still allows enough gas to flow through to ensure good shielding gas coverage.

Features:

• Type – Conical
• 16mm Bore Size
• 84mm Long
• Nickel Coated

Curious?

We are the approved Southwest distributor for many welding brands, and hold a large range of products in stock. Come and visit our showroom.